Drive Unit
01005 E-Access (Removal and Replacement)
Correction Code : 01005 Working Hours : 6H
NOTE:
Unless otherwise explicitly stated in the procedure, the above correction code and Working Hours reflect all of the work required to perform this procedure, including the linked procedures.
Do not stack correction codes unless explicitly told to do so.
Remove
Step 1
Remove rear bumper . See link below
Step 2
Remove side upper panel. See link below
Step 3
Remove battery grill trim. See link below
Step 4
Remove Rear Wheel Liner. See link below
Step 5
Remove rear caliper. See link below
02007 Rear Brake Caliper (Removal and Replacement)
Tip: There are still oil pipes in the handle assembly, don’t pull it hard.
Step 6
Tip: There are still wiring harnesses in the handle assembly, don’t pull it hard.
Step 7
Remove Motor HV Harness . See link below
Step 8
Remove Swing Arm Underbody Panel . See link below
Step 9
Remove Bottom Shear Panel . See link below
Step 10
After remove the caliper ,the rear wheel can be install
Step 11
Remove the Watt’s Linkage assembly fixing bolt ( Troque : 60 N-m )
Step 12
Remove the upper rear shock bolts ( Troque : 70 N-m )
Step 13
Remove the brake oil line fixing screw on the left swing arm
Step 14
Remove the Load Weight sensor fixing screw on the right swing arm
Step 15
Remove the brake oil line fixing screw on theForged Swing Arm Cross Beam Assembly
Step 16
Remove the swing arm bolts with Rear chassis ( Troque : 84 N-m )
Step 17
The rear suspension assembly can be pulled back
Step 18
Remove the Watt’s Link Assy fixing bolt ( Troque : 67 N-m )
Step 19
Remove the left and right Wheel
Step 20
Rvmove the left and right Spring and Damper ( Troque : 70 N-m )
Step 21
After remove the screws securing the Drive Shaft Assy and the Swing Arm, separate the Drivetrain Assembly from the swing arm. ( Troque : 50 N-m )
Step 22
After remove the screws securing the Drive Shaft Assy and the E-Access, separate the Drive Shaft Assy from the E-Access. ( Troque : 84 N-m )
Install
Installation procedure is the reverse of removal.