Low Voltage Electrical
12014 DVR Module and Front Camera (Removal and Replacement)
Correction Code : 12014 Working Hours : 0.3H
NOTE:
Unless otherwise explicitly stated in the procedure, the above correction code and Working Hours
reflect all of the work required to perform this procedure, including the linked procedures.
Do not stack correction codes unless explicitly told to do so
Remove
Step 1
Remove left Front Upper Side Cover. See link below
Step 2
Remove the DVR Plug

Step 3
Rvmove the DVR Module and Front Camera bolt

Precautions
The 12V battery must be disconnected before install the DVR plug
Step 1
Disconnect the 12V battery Negative

Install
Installation procedure is the reverse of removal.
