Brakes
02007 Rear Brake Caliper (Removal and Replacement)
Correction Code : 02007 Working Hours : 0.5H
NOTE:
Unless otherwise explicitly stated in the procedure, the above correction code and Working Hours reflect all of the work required to perform this procedure, including the linked procedures.
Do not stack correction codes unless explicitly told to do so.
Remove
Step 1
Rasie Vehicle . See link below
Step 2
Remove Rear Wheel Assy . See link below
Step 3
Put EPB into maintenance mode . See link below
Step 4
Disconnect the electrical connector from the rear brake caliper.
Step 5
Remove the Rear brake Caliper line bolt , And use a container to collect brake fluid ( Troque : 30 N-m )

Step 6
Remove the Rear brake Caliper fixing bolt . ( Troque : 65 N-m )

Install
Installation procedure is the reverse of removal.
Step 1
Perform brake fluid bleeding . See link below
