General Information
00001 Raise Vehicle
Correction Code: 00001
NOTE:
Unless otherwise explicitly stated in the procedure, the above correction code and Working Hours reflect all of the work required to perform this procedure, including the linked procedures.
Do not stack correction codes unless explicitly told to do so.
Before lifting the vehicle, make sure the vehicle’s tilt locks and parking locks, and confirm that the “P” mode indicator and the ETL tilt system indicator on the instrument cluster are illuminated to indicate that the vehicle’s parking locks and tilt locks have been successfully pulled up and that the Rapide 3 vehicle has stopped and cannot be moved.
Raise point
Lift point 1
Place the jack under the footrest to lift the vehicle
Lift point 2
The left side is under the rocker arm, the right side is the same.
Lift point 3
Use jack stands to support the connection between the rear chassis and the swing arm